DCWS-48125 30-Amp ON/OFF Switch
The DCWS-48125 is a 30-Amp ON/OFF switch features a double pole 30 ampere non-reversing surface toggle switch. Placing the DCWS-48125 Switch before a DC power load eliminates in-rush current, providing reliable ON/OFF control of 48DC to 125DC light fixtures. UL listed, CSA and CE mark.
SPECIFICATIONS:
DCWS: DC Wall Switch
Maximum Input Voltage: 230DC
Max. Current: 30 Amps 2 Pole 1 Phase
Connections: Screw clamp terminals
Wires: Use 14-20 WAG cables
Operating Temp: 0°C to 50°C
Unit Size: 1.69”x 2.34”x 4.13”
Protection: Reverse & Static
Dimming: None
Switch type: Non reversing
Warranty: 2 years
Certification: UL listed, CSA & CE mark
INSTALLATION RECOMMENDATION:
Use both poles in parallel, by spitting the (+) wire into a Y connecting to the switch. Split each wire into one (1) of the two (2) poles (internal Contacts). Recombine (+) wires into a Y on the output of the Switch to the light fixture(s). The two (2) poles see half (1/2) the current entering the load. (See Installation Recommendation Schematic.)
Marshall DC Lighting
329 W Lone Cactus Drive Suite 1 Phoenix, AZ 85027
www.marshalldc.com
info@dclightfixtures.com
602-777-0028
